MicroNet RAIDBANK 5 Guia de Instalação descarregar pdf (Página 2)

IMPORTANT: The RAIDBank5 can only use one connection at

a time. Host plugs are shaped so they can only be properly

inserted one way; be sure to insert the plugs properly or you

may damage the system and void the warranty.

2. Connect the appropriate cable to your host.

3. Flip the power switch

located on the back of the

RAIDBank5 to the “ON”

position (labelled “-”.)

If Any LED glows red

and the system emits

a continuous beeping

sound, then the system is

reporting fault. Refer to your user

guide for further information.

Volume Setup- MAC OS Hosts

Before you begin, please make sure you are logged in with administrative

privileges. If you are unsure about your privilege level, please consult

your Macintosh OS-X user manual or your system administrator.

1 Launch the “Disk Utility” application located in the

Applications/Utilities folder.

2 Highlight your new drive and select the “Partition” tab

3 Select the new partition map type.

4 For each partition in the volume scheme, select the desired

ﬁle system format and volume name (optional)

5 Click the “Options” button. Select “GUID Partition Map” or “Apple

Partition Map” in the dialog box and click “OK”.

6 Click “Apply.” Your RAIDBank5 is ready to use!

USB

HIGH SPEED

mac

win

SATA

Configuration via RAID Mode Selector Switch

The Micronet RAIDBank5 supports RAID configuration via a

rotary switch located on the back panel. To change operating

mode, please select turn the rotary switch to the desired mode

and press the commit key.

Pos Mode

Stripe (RAID 0)

Mirror (RAID 10)

Cloned Mirror (N Way RAID 1)

RAID 3 (Fixed Parity)

Graphic User Interface (GUI)

Control

RAID 5 (Distributed Parity)

Large Mode (Span)

Port Multiplier (JBOD)

commit RAID Mode

1 2

Comentários a estes Manuais

Sem comentários

MicroNet RAIDBANK 5 Guia de Instalação Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Matrizes de discos MicroNet RAIDBANK 5