MicroNet mn100 Manual do Utilizador descarregar pdf

TAC I/A Series

SPECIFICATIONS

HARDWARE

Dimensions

4.37 in. W x 4.29 in. H x 2.00 in. D

(109 mm x 111 mm x 51 mm)

Enclosure

Conforms to NEMA-1 requirements.

Meets UL94-5V ﬂammability for plenum application

use.

Conduit Knockouts

Not applicable. Order optional MicroNet Enclosure,

MNA-FLO-1, if wiring to ﬂexible conduit is desired.

Mounting

35 mm DIN rail or panel.

Wiring Terminals

Screw terminals. Each terminal accepts one AWG

#16 to #24 (1.31 to 0.205 mm

maximum) wire.

ELECTRICAL

Power Supply Input

20.4 to 30 Vac, 50/60 Hz.

Maximum Power Consumption

15 VA at 24 Vac, 50/60 Hz, excluding relay output

power.

Surge Immunity Compliance

IEEE C62.41 (IEEE-587, Category A & B).

ENVIRONMENT

Operating Temperature

-40 to 140 °F (-40 to 60 °C)

Shipping and Storage Temperature

-40 to 160 °F (-40 to 71 °C)

Humidity

5 to 95% RH, non-condensing

MNL-100, MNL-150, MNL-200 Series Controllers

I/A Series Micronet MNL-100, MNL-150, MNL-200

The TAC I/A Series™ MicroNet™ MNL-100,

MNL-150, and MNL-200 Series Controllers are

interoperable controllers designed in accordance

with L

o n Ma r k ™ guidelines. When programmed

using WorkPlace Tech Tool, or loaded with a pre-

engineered application, these controllers provide

control for packaged rooftops, heat pumps, fan coils,

unit ventilators, and similar applications.

Controllers feature Sensor Link (S-Link) support, LED

indication, screw terminal blocks, as well as DIN rail

or panel mounting ability.

The MNL-100, MNL-150, and MNL-200 series

controllers use the same physical packaging, but

differ in the type and number of onboard I/O points

they provide.

Stand Alone or Connected

These controllers can function in either standalone

mode or as part of a L

o n Wo r k s ™ TP/FT-10 Free

Topology communications network. Using a TAC

I/A Series MicroNet Sensor (MN-Sx series), the

operator can monitor controller performance and edit

operational values. The WorkPlace Tech Tool software

is used to program the controllers.

AGENCY LISTINGS

FCC Part 15, Class A

UL 916, File #E71385 Category PAZX

Canadian

UL Listed to Canadian Safety Standards (CAN/

CSA 22.2)

Australian

Meets requirements to bear the C-Tick Mark

European Community

EMC Directive 89/336/EEC, EN61326

INPUTS AND OUTPUTS

Digital Inputs

(MN 100 and MN 200 only) Dry Contact. Detection of

closed switch requires less than 300 ohm. Detection

of open switch requires more than 100K ohm.

Digital Outputs

Current Ratings

24 VA at 24 Vac, pilot duty.

Speciﬁcations continued on next page.

1 2 3 4

Resumo do Conteúdo

Página 1 - SPECIFICATIONS

TAC I/A Series1SPECIFICATIONSHARDWAREDimensions4.37 in. W x 4.29 in. H x 2.00 in. D(109 mm x 111 mm x 51 mm)EnclosureConforms to NEMA-1 requirements.M

Página 2 - FEATURES

2TAC I/A SeriesMNL-100, MNL-150, and MNL-200 Series ControllersSchneider Electric 1354 Clifford Avenue, P.O. Box 2940, Loves Park, IL 61132-2940, U

Página 3

3TAC I/A SeriesMNL-100, MNL-150, and MNL-200 Series ControllersSchneider Electric 1354 Clifford Avenue, P.O. Box 2940, Loves Park, IL 61132-2940, U

Página 4 - ARCHITECTURE

4TAC I/A SeriesOn October 1st, 2009, TAC became the Buildings Business of its parent company Schneider Electric. This document reflects the visual ide