MicroNet SP1910 Manual do Utilizador

1 User’s Manual 11N ADSL2+ Modem Router Model No.: SP3367NL

83. System and Network Setup 3.1 Build Network Connection Please follow the following instruction to build the network connection between the new

9 3. Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’ socket of the router. 4. The ADSL LED will be ON if th

103. Check the list of Network Components. If TCP/IP is not installed, click the <Add> button to install it. If TCP/IP is installed, go to st

11b) Windows 2000 1. Click the <Start> button and select <Settings>, then click <Control Panel>. The Control Panel window will app

122. Double-click <Local Area Connection> icon. The Local Area Connection window will appear. 3. Check the list of Network Components. Users

13 2. Select <Obtain an IP address automatically> and <Obtain DNS server address automatically>, then click <OK>. 3.3 Router’s

14 2. Enter ‘cmd’ command and click <OK>. 3. Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed by ‘Default G

15

164. Web-Based Management UI 4.1 Fast internet access In previous section, we have explained how to log on to the router and in the following; we

17Have you noticed the option of “ Network” ----“ Access Mode” . There are two modes available: DSL Uplink: Select this mode, if you are using a tel

2 Table of Contents 1. Introduction...2 1.1 Packa

18 Country: Select your country. Area：This option is mainly for distinguishing various areas and operators that have different VPI/VCI values. To ma

19There are 2 options to configure for the wireless part: SSID: It indicates the name of wireless network and can be modified (it can be letters, or

20 Enter the key: micronet24689 and click “ OK” ; system will automatically connects with your wireless network in a while. 4.2 Wireless Wireless

21  Enable Wireless: check/uncheck to enable/disable the wireless function. Wireless Mode:  b/g/n Mixed Mode: By default, system is in t

22only need to manually add it to the list. BSSID：BSS is a special Ad-hoc LAN application. A wireless network consists of, at least, an AP that is

23  Channel bandwidth: works in 11n mode only. 802.11n supports 20MHz and 20MHz/40MHz channels .Previous standard adopts the 20MHz

24Enable WPS: check/uncheck to enable/disable the WPS function. It is enabled by default. Note: The WPS feature only functions with wireless netw

25 And then click the “ Apply/Save” button on the above screen to save the parameter. Select “ Allow” on the page below: Example 2: If you want

26 4.2.4 Wireless Bridge Wireless Distribution System is used to extend the existing wireless signal coverage. Wireless bridge includes 2 modes: 1

27 In the above figure, 2 SP3367NLs are used to enlarge wireless signal coverage. SP3367NL-2 is configured as a wireless bridge to establish a wirel

1Certifications FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two co

28You only need to check the wireless network that you want to bridge with and click the “ Apply/Save” button. And system will automatically establ

29Service/Routing/DNS/DSL/UPnP/ Interface Grouping and Multicast as shown in the figure below: 4.3.2 Connection mode Connection Mode This router s

30 On this page, you can configure VPI and VCI values (consult your local ISP if you are not clear). For other options, keep the defaults and click

31interface)---“ Connection Setting” to enter WAN service setup interface (page1) and then click the “ Add” button there to select a WAN service t

32 PPP User Name: User name for PPPoE dialup. It is provided by your ISP.  PPP Password: The password provided by your ISP for PPPoE dialup. 

33 page 5 This page allows you to configure the DNS server’ s IP address for the WAN port. We recommend you to keep the default values if you are no

34 You can access Internet once PPPoE dialup succeeds. 4.3.4 IP over Ethernet When your ISP provides you an IP address or tells you that you only n

35  Use the following Static IP address: select this feature if your ISP provides you an IP address.  WAN IP Address: the IP address provided by

36 Page 2 We recommend you to keep the default settings unchanged and click the “ Next” button (on page 2) to enter the screen (page 3) below: pag

37Page 4 This page allows you to configure the DNS server’ s IP address for the WAN port. We recommend you to keep the default values if you are not

21. Introduction Micronet SP3367NL/SP3367NE, 11N ADSL2+ Modem Router, delivers highly reliable and scalable network environment. The model has incor

38 Modify the service description if necessary and then click “Next”. This page displays the configuration information. After confirmation, please

39 4.4.6 WAN Configuration in Ethernet Mode In Ethernet mode, system supports PPP over Ethernet (PPPoE), PPP over ATM (PPPoA) and IP over Ethernet I

40 Page 2  PPP User Name: User name for PPPoE dialup. It is provided by your ISP.  PPP Password: The password provided by your ISP for PPPoE dia

41enabled.  Multicast Proxy: Router enables multicast proxy server if this feature is enabled. Enter the PPP user name and PPP Password provided

42This page allows you to configure the DNS server’ s IP address for the WAN port. We recommend you to keep the default values if you are not clear

43  Obtain an IP address automatically: WAN port will automatically obtain an IP address for accessing Internet from the ISP, if this feature is

44 Page 2 We recommend you to keep the default settings unchanged and click the “ Next” button on page 2 to enter the page 3 below: Page 3 The pag

45 Page 4 This page allows you to configure the DNS server’ s IP address for the WAN port. We recommend you to keep the default values if you are no

46You can access Internet once the configured connection succeeds. 4.3.8 LAN You can change the IP address of the LAN port to match the requirement

47  Enable/ Disable DHCP Server: Click the corresponding button to enable/ disable the DHCP Server.  Start IP: The point from which DHCP server

3 PPP over Ethernet (RFC 2516).  Support 802.11n Wireless Access Point  Complies with IEEE 802.11n, IEEE 802.11g and IEEE 802.11b standards. 

48 Expires In: This item displays the leftover lease time. 4.3.10 NAT - Virtual Server When you create a server such as a Web server, FTP server o

49to define a service yourself.  Server IP Address: The IP address of the server created on LAN side.  External Port Start/ External Port

50 The screen appears as below after the above configuration is finished: Supposing that the IP address of PPP0 is 183.37.227.201, then the Interne

51 Click “ Advanced Setup” --- “ NAT” ---“ Port Triggering” to enter the port triggering interface and then click the “ Add” button to add rules.

52 Use Interface: It indicates which WAN connection the configured rules are to be applied to. When there is only one configured WAN c

53 -DMZ Host Once a PC on a LAN is set as a DMZ host, it can implement network communication with Internet without limit.  DMZ Host IP Addres

54 4.3.11 Security -IP Filter IP filter function can block LAN PCs from communicating with Internet PCs by preventing specific IP addresses from ac

55Destination Port: The port number or range used by LAN PCs in accessing external network. Note:  Packets filtered in this function are transfer

56 The ports that BT “ seed” server frequently uses are in the range of 6900-8100 such as 6969，8000 and 7373. So we can block this port range by

57Note: After you have added the URL filter rule, if you previously accessed this URL, then you need to reboot the router and delete your PC’ s cach

4 If users want to place this router at high places, please make sure the router is firmly secured. Falling from high places would damage the rout

58restrict. Enter it manually.  Start Blocking Time (hh:mm) / End Blocking Time (hh:mm): The time range during which Internet access i

59 Name: The name of the configured rule. Enable: Enable/Disable the rule. Interface: The interface that needs to configure priority. Precedence: S

60Select the WAN connection that you want to set as the gateway and click “ Apply/Save” to save the settings. The settings will be effective after

61 Click “ Apply/Save” to display the current configured static route information.  IP version: It is used to indicate that the IP belongs to IP

62-DNS server DNS server is used to map the domain name and it can be automatically obtained when you connect to the ISP or it can also be manually

63 Dynamic DNS Provider: Select your DDNS provider. Hostname: The domain name registered at the corresponding DDNS website. Interface: WAN conne

64 Click the checkbox to enable corresponding modulation modes, and then click “ Apply/Save” to complete the settings. Note: If you are not familia

65 Select “ Enable UPnP” and then click “ Apply/Save” to save the settings. Note: 1. Because the security of current UPnP version has not been gu

66  Group Name：The name of the configuration rule.  WAN Interface used in the grouping: WAN connection that needs to be grouped.  Available

67 Click “ Save/Apply” to save the settings. Note: After completing the settings, reboot the router to bring the router settings into effect. Aft

52. Physical Description 2.1 Back Panel Parameter Description ON/OFF Power Switch. Press it in to turn on the power and press it out to turn off

68 You can configure IGMP parameters on this screen, if you are not clear about the IGMP, we recommend using the default configuration. If you want

69 If you are not clear about the test result, please click “Help” for mor details.

705. Management Management settings include: system log, TR-069 client, Internet time, access control, backup, update, restore default，update softwa

71 5.2 SNMP Agent Read Community Specify the password for the incoming Get and GetNext requests from the management station. By default, it i

72 Set Community Specify the password for the incoming Set requests from the management station. Trap Manager IP Specify the IP address of t

73 3. Enter the Inform Interval which is 300, ACS URL (the domain name of the Auto-Configure Server), ACS User name, ACS Password and WAN Interface

74 5.4 Internet Time Internet time synchronization is used to update the router’ s system time so that the router’ s system time accords with the I

75Note: NTP time server is used to update the time. Select “ Time zone offset” as the time zone where you are. 5.5 Access Control This screen all

76 5.6 Backup With backup settings, you can back up your router’ s configuration. The steps are as follows: 1. Click “ Backup” to enter the “ Sett

775.7 Update This function enables you to import the previous backup file with ease. The steps are as follows: 1. Click the “ Update” menu to dis

6 Note: Please use the supplied power adapter, for use of an unmatched power adapter may damage the device. 2.2 Front Panel LED Color Status

78 2. Click the Restore Default Settings button, and click “ Ok” on the appearing dialog. 3. After clicking “ Ok” , you will see the procedure ba

795.9 Update Software Update Software enables you to upgrade the device to improve its system stability. The upgrade steps are as follows: 1. Click

80 Exit Select the Exit menu and click Ok on the appearing dialog to log out from the router’ s web-based utility. Back to Wizard Click Back to Wi

8110Base-T It is an Ethernet standard for Local Area Network (LAN). 10Base-T uses a twisted pair cable with maximum length of 100 meters. AAL ATM A

82has to send the packet to its default gateway, which will then send it out towards the destination. DHCP Dynamic Host Configuration Protocol, thi

83 ISP Internet Service Provider is a business that provides connectivity to the Internet for individuals and other businesses or organizations. I

84SMTP TCP 25 POP3 TCP 110 H.323 TCP 1720 SNMP UCP 161 SNMP Trap UDP 162 HTTP TCP 80 PPTP TCP 1723 PC Anywhere TCP 5631 PC Anywhere UDP 5632 PP

85Request for Comments. The document (begun in 1969) is for describing the Internet suite of protocols and related experiments. Not all RFCs describ

86VCI Virtual Circuit Identifier is part of the ATM cell header. A VCI is a tag indicating the channel over which a cell will travel. The VCI of a c

7 Always On The router has been connected to the computer ON Terminal WPS is successfully connected and the LED lights off in 5 minutes Flashing