MicroNet SP918BK Manual do Utilizador descarregar pdf (Página 10)

Wireless LAN Access Point Configuration

5: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband

Router’s DHCP server.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server available on

your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3.

1c) Windows 2000

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will

appear.

2. Double-click Network and Dial-up Connections icon. In the Network and Dial-up Connection

window, double-click Local Area Connection icon. The Local Area Connection window will appear.

3. In the Local Area Connection window, click the Properties button.

4. Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list.

Select it and click the Properties button.

5. In the Internet Protocol (TCP/IP) Properties window, select Use the following IP address and

specify the IP Address and Subnet mask as following.

9 IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is

available, do not setup 192.168.2.1)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Sem comentários

MicroNet SP918BK Manual do Utilizador Página 10