MicroNet SP918BK Manual do Utilizador descarregar pdf (Página 11)

Wireless LAN Access Point Configuration

9 Subnet Mask: 255.255.255.0

OK to confirm the setting. Your PC will no6. Click w have the IP Address you specified.

1d) Windows NT

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will

window.

stall it now. If TCP/IP is installed, go to step 5.

D to complete the installation.

the IP Address and Subnet Mask as

following example.

lable,

92.168.2.1)

• DN

•

7. Click O will now have the IP Address you specified.

2. Ente

configuration tool.

assword.

e and password is as follows.

r name and password, then press OK button directly.

appear.

2. Double-click Network icon. The Network window will appear. Select the Protocol tab from the

Network

3. Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, cli

the Add button to in

4. In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to

start installing the TCP/IP protocol. You may need your Windows C

5. After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network

Protocols and then click the Properties button.

6. Check each of the tabs and verify the following settings:

• IP Address: Select Specify an IP address. Specify

9 IP Address: 192.168.2.3 (any IP address within 192.168.2.2~192.168.2.254 is avai

do not setup 1

9 Subnet Mask: 255.255.255.0

S: Let all fields are blank.

WINS: Let all fields are blank.

• Routing: Let all fields are blan

K to confirm the setting. Your PC

r 192.168.2.1 from Web Browser to get into the Access Point’s

3. A screen will be popped up and request you to enter user name and p

The default user nam

User Name: Admin

Password: 1234

Enter the default use

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Comentários a estes Manuais

Sem comentários

MicroNet SP918BK Manual do Utilizador Página 11

Comentários a estes Manuais